The new EB3400 series connector is used connecting wires for LED modules or for making board to board connections of LED modules. With its flat design, it is primarily suited for LED applications. Due to its extremely low profile, it minimizes possible shadowing effect created by LEDs.

The EB3400 incorporates the tried and tested, screwless spring clamp technology which is well established in the market. The connector adapts contact pressure to wire size – contact pressure rises as the wire size increases. This way currents up to 9 amps can be safely transferred. Additionally, quick installation of single, solid wire conductors are made by simply pushing them in without the need for a tool. Wire removal and termination of stranded wire is accomplished with the use of the easy-to-use RT3400 release tool. The same tool is used to release non-pre-treated flexible fine-strand wires. Multiple operations of termination or release have no impact of the performance of the spring over time.

A funnel-shaped insert in the wire entry area guarantees quick and easy wire termination. The large flat surface on the top of the connector assures an easy pick and place operation with high speed, SMT assembly equipment. 

EB3400 connectors are available in 1 or 2-pole versions with a pin spacing of 4mm. They have a voltage rating of 250V for luminaires (IEC/EN 60598) resp. max. 320V with overvoltage category II / degree of soiling (IEC/EN 60664-1). Moldings are made from a glass-fiber, reinforced PPA and are suitable for reflow assembly lines.